JAECOO 7 (J7) Exterior Body and Collision Parts Guide

The JAECOO 7 has quickly developed a substantial presence in the UK market. According to the Society of Motor Manufacturers and Traders, 23,840 JAECOO 7 vehicles were registered during the first six months of 2026, making it the UK’s third-highest registered model year to date at the end of June.

As the number of vehicles on European roads grows, demand for JAECOO 7 body parts is also likely to increase. In the early years of a vehicle’s market life, much of this demand normally comes from accident repairs, parking damage and replacement of complete exterior assemblies rather than age-related corrosion or long-term wear.

This guide is intended for:

• Independent bodyshops and accident-repair centres;

• Automotive parts distributors and wholesalers;

• Vehicle importers;

• Fleet maintenance companies;

• Professional buyers sourcing JAECOO J7 or JAECOO 7 replacement parts.

It covers selected exterior components for which we currently have both an OE reference and a sourcing-reference image.

Important image notice: The images on this page come from our existing sourcing records. They are used to identify the product and do not indicate that the exact photographed unit is currently stored in our warehouse. Current availability, condition, colour, included components and lead time are confirmed when an enquiry is received.

The possible reasons for replacement described below are general body-repair scenarios. They should not be interpreted as evidence that these components are known JAECOO 7 reliability problems.

Quick JAECOO 7 Body Parts OE Reference

Some complete bumper assemblies use several individual sections and OE references. The numbers above reflect the combinations recorded in our sourcing documents; the quotation will clarify whether the customer requires the bumper cover, centre section, lower trim, grille, brackets or a more complete assembly.

1. JAECOO 7 Front-end Body Parts

JAECOO 7 Front Bumper Assembly

Sourcing-record references:
602003349AA / 602004935AA

The JAECOO 7 front bumper is one of the most visually distinctive parts of the vehicle. Its large central grille, side openings, lower trim and integrated mounting positions mean that “front bumper” can describe several different product configurations.

A customer may be looking for:

• The painted bumper cover;

• The centre bumper section;

• The radiator grille;

• Lower grille or trim sections;

• Fog-lamp or lighting surrounds;

• Tow-hook covers;

• Parking-sensor brackets;

• Camera or radar mounting components;

• A complete used take-off front-end assembly.

This distinction matters because a photograph of a complete assembly does not necessarily mean every grille, bracket, sensor or lighting component is included in the quotation.

Why might a JAECOO 7 front bumper need replacement?

Common replacement scenarios include:

• Low-speed frontal contact;

• Parking damage at the bumper corners;

• Contact with walls, posts or another vehicle;

• Cracks around sensor or lamp apertures;

• Broken mounting tabs;

• Damage to the grille or lower trim;

• Deformation caused by an impact behind the visible bumper surface.

A bumper cover may look repairable from the outside while its mounting points, supports or internal absorber have also been damaged. The workshop should therefore inspect the complete front-end area before deciding which components are required.

The headlight and daytime-running-light system will be covered separately in our JAECOO 7 Lighting Parts Guide, as the lighting assemblies require different checks for side, connector, module and vehicle specification.

JAECOO 7 Front Wings / Fenders

Left OE: 553000392AADYJ
Right OE: 553000393AADYJ

In UK body-repair terminology, this component is usually called a front wing. In international parts catalogues and many European export enquiries, it may also be described as a front fender.

Front wings are positioned between the front bumper and front door, making them vulnerable to damage from several directions.

Typical replacement scenarios include:

• Bumper-corner impacts transferring damage into the wing;

• Parking contact around the wheel arch;

• Damage around the headlamp mounting area;

• Creasing close to the door edge;

• Distortion around the upper mounting line;

• Previous repairs that no longer provide an acceptable panel finish.

Before replacing the outer wing, the workshop should inspect the wheel-arch liner, bumper mounting points, headlamp brackets and inner supporting structure.

A new outer panel cannot correct hidden deformation beneath it. Correct alignment depends on the condition of the mounting structure and the panel gaps between the bumper, bonnet and front door.

The image above shows the right-side reference. The corresponding left-side OE is listed in the same product group to avoid creating repetitive left and right sections.

2. JAECOO 7 Side Body Parts

JAECOO 7 Front Door Assemblies

Left OE: 551001481AADYJ
Right OE: 551001482AADYJ

Front doors are frequently requested following side impacts, parking damage or deformation around the hinge and latch areas.

However, the term front door assembly does not always describe the same product.

Depending on the available source, a front door may be supplied as:

• A bare metal door shell;

• A painted or unpainted door;

• A partially assembled replacement door;

• A used take-off door with glass and some fittings;

• A more complete assembly with lock, regulator, wiring or trim.

The reference image shows an assembled product, but customers should not assume that the mirror, window glass, door card, speaker, wiring harness or locking components are included with every unit.

Where a customer needs more than the metal shell, the required configuration should be explained during the enquiry.

What else should be inspected after front-door damage?

Before fitting a replacement door, the repairer should examine:

• Upper and lower hinges;

• Hinge mounting points;

• The A-pillar and surrounding door opening;

• Door striker and latch alignment;

• Wiring connectors between the body and door;

• Window frame and weather seals;

• Exterior handle and retracting-handle mechanism;

• Adjacent front wing and sill.

If the body opening has been distorted, replacing the door alone may leave uneven panel gaps, wind noise, water leakage or poor closing effort.

The OE references in our records may relate to a particular vehicle configuration. We therefore recommend confirming the required door using the VIN, existing label and photographs before quotation.

JAECOO 7 Rear Door Assemblies

Left OE: 551001483AADYJ
Right OE: 551001484AADYJ

Rear doors are also common accident-repair items, particularly after side contact that affects the rear door, wheel-arch area or adjacent quarter panel.

As with the front doors, customers should distinguish between:

• A bare rear-door shell;

• A door with window glass;

• A unit containing the regulator and locking mechanism;

• A used take-off assembly with interior and exterior fittings.

The image is provided as a product-identification reference. Final included components will be stated in the quotation.

Rear-door damage should be assessed together with the B-pillar, sill, rear wheel-arch area and latch mounting point. A door that appears to be the main damaged component may be only one part of the repair.

UK owners have also discussed individual driver-door access or handle-operation issues. A door that does not open from outside does not automatically require a complete replacement shell; the handle, lock, wiring, vehicle settings and mechanical alignment should be diagnosed first.

JAECOO 7 Exterior Rear-view Mirror

Right-side OE: 601000795AADQJ

Exterior mirrors are particularly exposed to damage on narrow roads, in car parks and when passing walls, posts or other vehicles.

A complete mirror assembly may combine several functions, including:

• Electric mirror adjustment;

• Power folding;

• Heating;

• Integrated indicator;

• Blind-spot warning;

• Position memory;

• Surround-view camera;

• Puddle or approach lighting.

Two mirrors can have an almost identical housing while using different wiring, plugs, cameras or electronic functions. For that reason, exterior appearance alone is not enough to confirm compatibility.

The photograph above is associated with the right-side reference shown. Customers should provide a clear picture of the original connector and product label when the electronic specification is uncertain.

Does a mirror that stops folding need to be replaced?

Not necessarily.

JAECOO 7 owners have discussed power-folding mirrors that stopped folding when the vehicle was locked. In one forum case, the function returned after the owner disabled and re-enabled the power-fold setting and saved the configuration again.

The vehicle manual also notes that automatic mirror folding is controlled through vehicle settings and warns against manually forcing electric mirrors, particularly when they may be frozen in cold weather.

Before ordering a complete mirror, the workshop or owner should therefore consider:

• Vehicle settings;

• Fuse and power supply;

• Door wiring;

• Mirror connector;

• Folding motor;

• Physical impact damage;

• Ice or obstruction;

• Camera or blind-spot equipment.

A broken housing or mounting base may require a complete replacement, while a configuration or wiring issue may not.

3. JAECOO 7 Rear Body Parts

JAECOO 7 Rear Bumper Assembly

Sourcing-record references:
602003172AA / 602007381AA

Rear bumpers commonly generate enquiries after reversing accidents, parking contact and low-speed rear collisions.

The JAECOO 7 rear bumper assembly may include or interact with:

• The painted upper bumper cover;

• Black lower trim;

• Decorative outlet trims;

• Reflectors;

• Parking-sensor apertures and brackets;

• Side supports;

• Lower skid-style trim;

• Internal reinforcement and absorber components.

As with the front bumper, a customer should clarify whether the requirement is for one section or a more complete assembly.

Why should the area behind the bumper be inspected?

Plastic bumper covers can flex during an impact and partially return to their previous shape. This can hide damage to:

• Side mounting brackets;

• Internal supports;

• Energy-absorbing material;

• Rear bumper reinforcement;

• Rear body panel;

• Sensor holders;

• Wiring close to the impact area.

A quotation based only on an exterior photograph may therefore omit parts that become visible after dismantling.

The OE combination above comes from our existing sourcing records for the photographed assembly. Since rear bumpers may be divided into several components, the required pieces will be identified during the enquiry rather than treating the two references as universally interchangeable.

JAECOO 7 Tailgate Assembly

OE: 552000387AADYJ

A replacement tailgate may be required after:

• Rear collision damage;

• Deformation around the latch;

• Damage at the hinge mounting points;

• Broken glass accompanied by panel damage;

• Vandalism;

• A previous repair that cannot be aligned or sealed correctly.

A tailgate assembly may describe anything from the metal panel to a more complete used unit.

Possible attached components include:

• Rear glass;

• Hinges;

• Power supports or struts;

• Lock and release mechanism;

• Exterior opening switch;

• Camera;

• Wiring;

• Spoiler;

• Centre lamp;

• Garnish and model lettering;

• Interior trim.

The photograph should not be interpreted as confirmation that all of these parts are supplied together. The quotation will state the actual configuration available.

A tailgate stops partway — does the complete panel need replacing?

Usually, this should be diagnosed before the metal tailgate is ordered.

JAECOO 7 owners have discussed the operation of the hands-free tailgate and cases in which the hatch stopped partway when the user stood too close to the vehicle. Forum responses noted that the proximity-sensing system can stop movement when it detects an obstruction or person.

Other possible causes include:

• Incorrect opening-height settings;

• A sensor or switch issue;

• Latch resistance;

• Wiring problems;

• A power-strut fault;

• Physical misalignment;

• Damage after a rear impact.

The complete metal tailgate is normally relevant when the panel or mounting area is damaged. An operating or sensing issue may require a different component or a vehicle-setting check.

Product Sourcing and Compatibility Support

The OE references shown on this page are within our current sourcing scope, but they should not be treated as a substitute for final vehicle identification.

This is particularly important for:

• Complete bumper assemblies;

• Doors with attached components;

• Mirrors with cameras or blind-spot functions;

• Parts that may differ between petrol and plug-in-hybrid vehicles;

• Components affected by production revisions.

Customers are welcome to send us:

• The VIN;

• The OE reference shown on the original component;

• Photographs of the damaged or removed part;

• The required vehicle side;

• The required assembly contents;

• Quantity;

• Destination country and postcode.

Where connector design, mounting positions or included fittings affect the order, our team can review the available information and advise what should be confirmed before quotation.

We do not describe every part as universally interchangeable simply because it has a similar appearance.

Available Supply Options

Depending on the OE reference and current lawful availability, quotation options may include:

• Original / Genuine parts;

• OEM or OE-supply parts;

• Aftermarket replacement parts;

• Used take-off parts removed from donor vehicles.

Not every supply type is available for every product. The offered category will be clearly stated in the quotation.

Original or branded products remain subject to lawful availability, export eligibility, brand-distribution restrictions and the import requirements of the destination country.

For used take-off parts, current photographs should be reviewed before the order is confirmed. Paint condition, scratches, dents, previous repair work and included accessories may vary between individual units.

We do not use the term “OEM quality” as a general description for every product. Where an OEM or OE-supply option is offered, its supply status will be stated separately from Original/Genuine and Aftermarket products.

Direct Shipping from China to Europe

We currently ship JAECOO 7 body parts directly from China rather than presenting them as UK or EU warehouse stock.

Delivery time depends on:

• Current sourcing lead time;

• Destination country;

• Product dimensions and weight;

• Order quantity;

• Packing requirements;

• Transport method;

• Customs clearance.

Large body components such as bumpers, doors and tailgates require more protection than small mechanical parts.

Packaging may include:

• Reinforced cartons;

• Protective foam;

• Corner and surface protection;

• Internal frames;

• Wooden crates for selected large orders.

Freight is often calculated by dimensional volume rather than actual weight. For distributors and repair groups, combining several large body parts into one shipment may be more economical than shipping each item separately.

Current product availability, packing method, freight option and estimated lead time will be included in the quotation.

Frequently Asked Questions

Are JAECOO 7 body parts available in the UK?

JAECOO operates an official UK accident-assistance and approved-repair route that uses approved repair centres and genuine parts.

However, availability can vary according to the exact component, repair centre, vehicle specification and current stock. Recent UK insurance reporting has also identified developing repair data and parts-supply networks as factors affecting some newer Chinese vehicles, including the JAECOO 7.

Our service provides an additional sourcing route from China. It should not be described as guaranteed UK local stock: availability and delivery time are checked for each enquiry.

For insurance or warranty repairs, customers should confirm with their insurer or approved repair centre whether independently sourced parts can be used.

Does a front or rear bumper assembly include all grilles and brackets?

Not automatically.

“Bumper assembly” may refer to the painted cover, several connected sections or a more complete used assembly. Grilles, trims, sensor brackets, reflectors and wiring may be supplied separately.

The quotation will identify the actual included components.

Does a replacement door include the mirror and window glass?

Not necessarily.

A door may be supplied as a bare shell or as a partially complete used take-off assembly. The mirror, glass, regulator, lock, wiring and interior trim must be confirmed separately.

Customers requiring a complete door should specify the components they need.

Are petrol and plug-in-hybrid JAECOO 7 body parts interchangeable?

Some exterior panels may appear similar, but interchangeability should not be assumed.

Differences can exist in lower panels, brackets, wiring, trim and attached equipment. A VIN and original-part comparison are recommended before confirming the order.

Can I order using only an OE number?

An OE number is the best starting point, but complete assemblies may still require more information.

For the most reliable result, provide the OE number together with the VIN, vehicle side and original-part photographs.

Can you supply Original, OEM, Aftermarket and used parts?

Depending on the OE reference and current lawful supply, we may be able to quote Original/Genuine, OEM or OE-supply, Aftermarket and Used Take-off options.

The available category will be stated clearly for the specific enquiry. We do not promise that every OE reference is available in all four versions.

Are the photographs current warehouse-stock photos?

No.

The photographs on this page come from our existing sourcing documents and are used as visual references. They show that the product has previously been identified within our supply network, but they do not prove that the exact photographed unit is currently in our warehouse.

For a confirmed enquiry, current availability and condition information will be requested from the relevant source.

How long does shipping to Europe take?

Delivery time varies significantly by product.

A mirror or small trim component may be shipped by express service, while a bumper, door or tailgate may require special packing and freight transport.

The estimated sourcing time, packing time and delivery option will be provided after the destination and required product are confirmed.

Request a JAECOO 7 Body Parts Quotation

For a JAECOO 7 or JAECOO J7 exterior body-parts enquiry, please send:

VIN + OE number + original-part photos + required quantity + destination

Our team will review the available sourcing information and help clarify:

• Product position;

• Relevant OE reference;

• Required assembly contents;

• Available supply option;

• Current condition;

• Packaging;

• Estimated sourcing and delivery time.

Email: sales01@gzhella.com
WhatsApp: +86-18513787764

All products listed on this page are currently sourced and shipped from China. Final availability and compatibility are confirmed before order.

Independent supplier notice: Hella Auto is an independent automotive-parts supplier and is not affiliated with or endorsed by JAECOO. Brand names, model names and OE references are used only for product identification.